Top 10 typical forklift crashes ， forklift procedure need to pay attention to these issues ！.
Top 10 typical forklift crashes ， forklift procedure need to pay attention to these issues ！.
Blog Article
Do not undervalue the forklift at work. If the operation is not good, there will certainly be severe accidents in mins, and there are many crashes including forklifts.
Case 1: The forklift cargo obstructed the vehicle driver's sight, and the person ahead might not be found, leading to a rolling accident.
Instance 2: In order to preserve the equilibrium of the forklift when lifting heavy goods, the workers utilized their body weight as the counterweight, which nearly triggered casualties.
Case 3: The size of the forklift freight goes beyond the permitted size of the route and hangs on the roadside rack, which virtually creates an crash.
Case 4: Forklift is speeding and rolls over during a turn.
Instance 5: The forklift chauffeur did not observe the pedestrian, and the pedestrian did not notice the forklift.
Situation 6: The forklift lifts the employees illegally, the forklift driver does not use the seat belt, the forklift lifter drops and the chauffeur is crushed when the forklift surrender.
Situation 7: The forklift vehicle driver did not put on a seat belt and dropped from the lorry when it rolled over and was crushed.
Forklift procedure need to focus on these issues ：.
Begin.
1. Before beginning, observe the surroundings, and after validating that there are no obstacles that impede the safety of driving, beep the horn first and afterwards start.
2. For lorries with hydraulic ( atmospheric pressure) brakes, the brake hydraulic stress (air pressure) scale have to be risk-free before beginning.
3. When the forklift starts with a tons, the chauffeur must initially validate that the tons is stable and dependable.
4. The start must be slow and constant.
Driving.
1. When driving, the elevation between the bottom end of the fork and the ground ought to be maintained 300mm-400mm, and the mast ought to be tilted backwards. .
2. Do not lift the fork too high when driving. When going into and leaving the job website or while driving, be careful that there will certainly be no barriers in the sky. When the tons is taking a trip, the fork should not be increased too high, which will affect the stability of the forklift. .
3. After unloading, the fork needs to be lowered to the typical driving setting before driving. .
4. When transforming, if there are pedestrians or lorries close by, the driving signal needs to be released initially. High-speed doglegs are restricted. High-speed doglegs will certainly cause the car to shed lateral security and topple. .
5. When the forklift is downhill, it is strictly forbidden to shut off the fire and slide, and it is restricted to brake suddenly while driving with lots unless there are unique conditions.
6. When the forklift is running, it has to follow the web traffic rules in the factory and should keep a particular safety range from the vehicle ahead. .
7. When the forklift is running, the lots should remain in the most affordable placement that does not impede the driving, and the gantry ought to be effectively tilted back. The tons will not be raised other than when stacking or packing. .
8. The elevation of the load have to not obstruct the chauffeur's sight. In special situations, when the product impacts the forward vision, drive at a reduced rate when reversing.
9. It is restricted to activate the ramp, neither to drive throughout the ramp. .
10. The secure driving rate of the forklift in the manufacturing facility area is 5 km/h, and it should drive safely at a reduced speed when entering the manufacturing workshop area. .
11. When the forklift is raised, lifted or driven, it is restricted for workers to base on the fork to hold items and play a balancing role. .
12. If troubles are found, they will be fixed and reported in a prompt way, and they will never run with illnesses or hide them.
filling and discharging.
1. When fork-loading products, the distance in between the two forks ought to be adjusted as required to make the tons of the two forks well balanced and not skewed, and one side of the thing must be against the shelf. .
2. It is prohibited to work with a single fork or make use of a fork top or pull. In unique situations, security indication should be established to advise surrounding pedestrians. .
3. In the process of loading and dumping items, the forklift needs to be braked with the brake. .
4. The rate of the car need to be slow and consistent. Be careful not to roll the wheels on the dunnage, so as not to stretch the rolled things and hurt people. .
5. When making use of a fork to fork the goods, the fork should be as deep as possible under the tons, and it needs to be kept in mind that the fork suggestion need to not touch other goods or things. The load must be stabilized with minimal back Stand-on Electric Pallet Stacker tilt of the gantry Electric Forklift Truck for Warehouse so that the load does not slide backwards. The pole can be tilted ahead a little when the load is reduced to enable easy placement of the tons and removal of the forks. .
6. It is restricted to fork items at high speed and collide with difficult things with the fork head. .
7. When the forklift is working, it is restricted for people to loaf the fork, so as to avoid the collapse of the goods and harm individuals. .
8. Overwhelming is prohibited, and it is prohibited to use forks to raise personnel to engage in high-altitude operations to avoid high-altitude falling mishaps. .
9. It is not permitted to make use of the brake inertia to slip, place, round or roll objects. .
10. It is not permitted to use forks to select, transform pallet dump.
Leaving .
1. It is restricted to leave the forklift when the products on the fork impend. Before leaving the forklift, you have to discharge the goods or lower the fork frame.
2. Pull the parking brake manage to dead or depress the parking brake button.
3. The engine is switched off and the power is removed. (Except for special scenarios, such as the vehicle driver does not leave the vehicle's line of vision and does not surpass 1 minute).
4. Get rid of the key. .
Forklift Operation Precautions.
1. Before and after the forklift procedure, the look should be inspected, and gas, lubricating oil and cooling water need to be added.
2. Inspect the safety efficiency of beginning, running and braking.
3. Examine whether the lights and horn signals are complete and effective.
4. During the operation of the forklift, examine whether the pressure and temperature are regular.
5. After the forklift is running, the exterior leak must additionally be examined and the seals must be changed in time.
Forklift Safety Operation Specifications.
1. You have to examine before leaving the car;.
2. When you come across someone before you during driving, you must send out a signal at a distance of 5 m;.
3. The driving speed in the factory does not exceed 5 km/h;.
4. When driving, the nadir of the freight must be 0.3 m ~ 0.4 m above the ground;.
5. The transforming ought to not be also sharp to prevent the tendency of " complimentary switching";.
6. Adding and down the slope must be slow-moving and uniform, and no activating the incline is enabled.
7. Do not drive throughout the slope. When the slope is greater than 10%, the car should be driven in reverse when worsening;.
8. When the forklift employees bring the goods and move forward, if they run into huge or hefty goods and most likely to the chauffeur's line of vision, they must take the reversing workout
.
The "Eight Prohibitions" need to be adhered to in the operation.
1. Solitary fork procedure is not permitted.
2. It is not enabled to lift the goods for cross country driving.
3. It is not allowed to pick up the goods by turning over the pallet with the fork.
4. It is not allowed to straight shovel chemicals, flammables and various other harmful chemicals with forks.
5. It is not enabled to use inertia force to get the goods.
6. It is not allowed to use braking pressure to expatriation round or easy-to-roll items.
7. It is not enabled to bring people to service the pallet or fork, and it is purely prohibited to stand under the fork after the fork is elevated.
8. Do not drive side to side on inclines
.
Car parking is not permitted under the list below problems.
1. Contours, slim roads, railway crossings;.
2. Sections with a longitudinal incline above 5%.
3. When there is an obstacle on one side of the roadway, the opposite side of the section with the very same size as the challenge ought to be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844